blank space Specifications
How to Install
FAQs
blank space
blank space Adobe PDF document icon
Brochure
(123K PDF)
blank space Adobe PDF document icon
Spec Sheet
(463K PDF)

WMBD24 | $75.00
Inside Dimensions:
Depth: 24" (Front to back)
Width: 24"
Surge Capacity: 6.86 gallons
Outside Dimensions:
Height: 3" (Floor to top rim)
Width: 27"
Depth: 29" (Front to back)
Dimensions do not include flange.
Approximate Dimensions.

WMB27 or WMBD27 | $78.00
Inside Dimensions:
Depth: 27.50" (Front to back)
Width: 27.50"
Surge Capacity: 9.0 gallons
Outside Dimensions:
Height: 3" (Floor to top rim)
Width: 30"
Depth: 32.25" (Front to back)
Dimensions do not include flange.
Approximate Dimensions.

WMB32 or WMBD32 | $89.00
Inside Dimensions:
Depth: 32.25" (Front to back)
Width: 27.50"
Surge Capacity: 10.47 gallons
Outside Dimensions:
Height: 3" (Floor to top rim)
Width: 30"
Depth: 36.75" (Front to back)
Dimensions do not include flange.
Approximate Dimensions.

Ordering considerations
Be sure to order well before rough-in plumbing and allow at least two weeks for delivery.

UL 94 G60-25-144

How to Order

blank space
blank space
Please Measure Carefully!

Measure your appliance 3" from the floor for the inside dimension.

Measure the room space available for outside dimension to determine the correct pan size.

blank space
blank space
blank space
Specifications
FloodSaver Pans

FloodSaver 24", 27" and 32" Pans without Drains
Suggested Specifications
Each FloodSaver Washing machine pan is a 1-piece system which consists of a single formed high-density polyethylene base. Base shall form a minimum 3" deep containment pan and shall accommodate a standard shower-type drain.

Please Measure Carefully!
Measure your appliance 3" from the floor for the inside dimension. Measure the room space available for outside dimension to determine the correct pan size.

Outflow Indent
Indent accommodates washers with bottom center hose outflows.

Nailing Flange
In new construction, the 5/8" flange is nailed to sub-floor. Underlayment is installed over flange. In retrofit applications, the 5/8" flange is fastened on top of finish flooring, then covered with trim. (NOTE: Trim is not included.)

Suggested Drain Hole Placement
One (1) 3.25" hole for standard shower drain. Position hole in any logical location. NOTE: Valves, shower drains, pipe/trap are not included.

FloodSaver 24" Pan WMBD24FloodSaver 24" Pan

FloodSaver 27" Pan WMBD27FloodSaver 27" Pan

FloodSaver 32" Pan WMBD32FloodSaver 32" Pan

FloodSaver 27" and 32" Pans with Drains
Suggested Specifications
Each FloodSaver Washing machine pan is a 1-piece system which consist of a single formed high-density polyethylene base. Base shall form a minimum 3” deep containment pan and shall accommodate a standard shower-type drain.

Outflow Indent
Indent accommodates new-style washers with bottom center hose outflows.

Drain Hole
3.25” hole for shower drain on center; 16" to wall on 27" pan and 16.25” on the 32" pan to wall plate; 15.00” to outside base side.

Nailing Flange
In new construction, the 5/8” flange is nailed to sub-floor. Underlayment is installed over flange. In retrofit applications, the 5/8” flange is fastened
on top of finish flooring, then covered with trim. (NOTE: Trim is not included in measurement.)

FloodSaver 27" Pan with Drain WMB27
FloodSaver 27" Pan with Drain

FloodSaver 32" Pan with Drain WMB32

Please note the WMB27 and WMB32 have the same dimensions as the drainless pans above.

Warranty Information and How to Order

Made in the USA