Specifications

FloodSaver® Surrounds

FloodSaver® 27" Surround includes: WMWP Wall panel and 27" base

Suggested Specifications

Washing machine surround shall be FloodSaver® WMWP Wall panel and 27” base; 2-piece system to consist of formed high-density polyethylene base and wall panel. Base shall form a minimum 3" deep containment pan and shall accommodate a standard shower-type drain. The WMB27 base is available with a drain while the WMBD27 base is drainless. Wall panel shall provide minimum 3" spray barrier on sides and top.

Please Measure Carefully!

Measure your appliance 3" from the floor for the inside dimension. Measure the room space available for outside dimension to determine the correct pan size.

Outflow Indent

Indent accommodates washers with bottom center hose outflows.

Attachment Flange

In new construction, the 5/8" flange is nailed to sub-floor. Underlayment is installed over flange. In retrofit applications, the 5/8" flange is fastened on top of finish flooring, then covered with trim. (NOTE: Trim is not included.)

Drain Hole

3.25" hole for shower drain on center; 16" to wall to wall plate; 15.00" to outside base side. WMBD27 Drainless Base is used in applications where a floor joist or other obstruction requires flexibility in drain placement.

PLEASE MEASURE CARFULLY!

Measure your appliance 3" from the floor for the inside dimension. Measure the room space available for outside dimension to determine the correct pan size.