FAQs

FloodSaver® Slide-N-Fold™ Pans

1. What is the best way to install the Slide-N-Fold®?
2. What is "Surge Capacity?"
3. Why is the front of my Slide-N-Fold® visible under the dishwasher door?
4. How should the Slide-N-Fold® be plumbed, and what kind of fitting does it require?
5. How do you keep the gas trap from drying out?
6. What precautions should I take when sawing through the Slide-N-Fold® to install the drain?
7. What do we mean by "Creative Uses?"
8. Can I order any time, day or night?
9. Is Slide-N-Fold® covered by a warranty?

1. What is the best way to install the Slide-N-Fold®?

   When sliding the appliance into the Slide-N-Fold® pan make sure the front side is flat against the floor and the corners are not caught in anyway by the appliance. We recommend placing of a piece of cardboard in the area which will protect the front side and can be removed after the appliance is in place.
   Back to Top
   
   

2. What is "Surge Capacity?"

   A broken appliance can dump a relatively large amount of water in a short period of time. To buffer this possibility the pan must contain the water without overflowing the pan until the 2" drain line can drain the excess water. We call this "Surge Capacity."
   Back to Top
   
   

3. Why is the front of my Slide-N-Fold® visible under the dishwasher door?

   The Slide-N-Fold® is 24" x 24". When fitted properly against the back wall of the cabinet, the front edge extends under the dishwasher door. While this intrudes somewhat into the toe-kick area, it is necessary to catch water dripping out of the dishwasher due to a leaking door seal - one of the primary causes of dishwasher leaks.
   Back to Top
   
   

4. How should the Slide-N-Fold® be plumbed and what kind of fitting does it require?

   The Slide-N-Fold® uses a standard shower or sink-type drain fitted to a 1-1/2" or 2" line. Often plumbing inspectors will allow this line to be run outside to a drain because it is for an emergency only. This saves the empty gas trap problem. Check with your plumber.
   Back to Top
   
   

5. How do you keep the gas trap from drying out?

   If a gas or P-trap is used a mineral oil or an oil made specifically for this application can be poured into the trap which will not evaporate like water and will seldom need attention. The plumber should be consulted on this.
   Back to Top
   
   

6. What precautions should I take when sawing through the Slide-N-Fold® to install the drain?

   We recommend using a hole saw and RUNNING THE SAW BACKWARDS so as to cut through the material more gently and reduce the risk of tearing the material.
   Back to Top
   
   

7. What do we mean by "Creative Uses?"

   Over the years our customers have found uses for the Floodsaver and Slide-N-Fold® pans that we would have never thought of. From dog washing stations to milling machines, pans used in labs to wash the sand off the toes without making a mess pans. Using an APFP2424 under the real Christmas tree stand to catch the water/protect the floor under the skirt. Creativity is great!
   Back to Top
   
   

8. Can I order any time, day or night?

   Yes, by fax. (360) 629-2838. If you'd like, you can use our Order Form. If you order by email, be sure to include:
   1. Name
   2. Phone number
   3. Shipping Address
   4. Number of units and model
   5. MasterCard or VISA number & expiration date
   6. Mailing address if different from shipping (we will mail card slip and invoice)
   Back to Top
   
   

9. Is Slide-N-Fold® covered by a warranty?

   Yes.
   
   

   What does this warranty cover?

   This warranty covers defects in material and workmanship which result in significantly altered appearance or which affect the performance of the unit as a water containment device.
   
   

   How long does coverage last?

   This warranty lasts for a period of one (1) year from date of purchase. Coverage terminates if you sell or otherwise transfer the FLOODSAVER® unit.
   
   

   What will AMI, Inc. do?

   AMI, Inc. will, after inspection and verification of claimed defect, supply a replacement without charge for the unit, excluding any costs of removal or installation.
   
   

   What does this Warranty NOT cover?

   This warranty does not cover problems caused by installation of unit or associated plumbing not in keeping with recommendations supplied by AMI, Inc. or requirements of the local plumbing code, unreasonable use, including a badly out of balance washing machine, any unauthorized alteration of the unit such as drilling holes except those required for installation, heating, cutting, trimming or any other modifications or alternations not specifically authorized in writing by AMI, Inc. abuse, misuse, wear, failure to follow directions, improper maintenance, acts of God such as earthquake or other factors not relating to the product's condition at the time of sale. Also consequential and incidental damages are not recoverable under this warranty. Some states do not allow the exclusion or limitation of incidental or consequential damages or allow limitations on how long an implied warranty lasts. Thus the above limitation or exclusion may not apply to you.
   
   REPAIR, REFINISHING OR SUPPLY OF A REPLACEMENT UNIT UNDER THIS WARRANTY SHALL BE THE EXCLUSIVE REMEDY OF THE OWNER. AMI, Inc. SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING ANY DAMAGE TO THE BUILDING, ITS CONTENTS OR OCCUPANTS OR FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY. ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY.
   
   

   How do you get service?

   To make a claim under this warranty, please send to the address below the following information: Name and address of the owner; proof of data of purchase; model number; a description of the defect. After receipt of this information, AMI, Inc. will promptly perform its obligations under this warranty. FLOODSAVER IS MADE OF FLAME RETARDANT MATERIAL (UL 94 G60-25-144).
   Back to Top
   
   

PLEASE MEASURE CARFULLY!

Measure your appliance 3" from the floor for the inside dimension. Measure the room space available for outside dimension to determine the correct pan size.